Onboard Weighing Systems Transport
Home | Highway | Bulk | Logging | Waste | Loaders | Mining | Fork Lifts | Airtec | Red Forge | Software | About Us | Contact Us
onboard Weighing Systems Transport


  

HIGHWAY
BULK HAULAGE
LOGGING
WASTE LOADERS MINING
FORK LIFTS AIRTEC RED FORGE SOFTWARE

LOADMAN AUSTRALIA - AIRTEC



AIRTEC Digital Axle Load Indicator System


The AXL product range is a cost effective solution for mass management with the ability to calibrate the weight reading in kilograms. The 5 digit kilogram display provides a more accurate and easy to understand weight reading when compared to the traditional analogue pressure gauge as widely used for weight monitoring. Compared to the costs of overweight fines the AXL-200i represents good value and peace of mind for the owners and drivers.

There are 2 versions of the AXL product:
The AXL-200i is a simple to install and calibrate system for air suspension axle groups with a single ride height valve.

The AXL-202i is designed for prime mover and trailer suspensions which operate with dual ride height suspension systems. This unit will accept 2 inputs from the suspension and will sum and total the weight reading.

The installation of the both units is a relatively simple task with a pressure connection from the air suspension and an electrical power input in the range of 7 to 28 Volts. The electrical power can be a dedicated supply or simply obtain power from the vehicle side or clearance light circuit.

After the AXL products are installed the calibration process requires the tare weight to be programmed into the unit. The vehicle is loaded and the weight is verified by a weigh bridge this Gross weight reading is programmed into the meter and the calibration is complete.



 

 
Home | Highway | Bulk | Logging | Waste | Loaders | Mining | Fork Lifts | Airtec | Red Forge | Software | About Us | Contact Us |
€2005 Loadman Australia
Prospect, NSW
Ph 1300 307 737
info@loadman.com.au